install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
7.16.3
4.
It is recommended to test these commands by first selecting the desired table
entry and then clicking on the
Test
button. As commands are sent to the audio
mixer, they are displayed in the header of the Audio Follow window. If everything
is connected and programmed properly, the commands should be noticed on the
audio mixer.
5.
Sometimes it is desirable to disable a command temporarily, without losing its
settings. This can be accomplished by pressing the
Disable
button. Disabled
commands are shown in the table with leading minus signs
‘-’.
When a
command is disabled you may still have the option to test the command. To
reactivate the settings, click on the
Enable
button.
6.
Buttons are also provided for permanently clearing a table entry
Clear
and
clearing all table entries
Clear All
. Note these functions are not undoable.
Information will be lost when the buttons are selected.
7.
To close the programming section, either click the
Save and Close
button or
uncheck the
Setup, View Setup
menu option.