install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
9.
To configure other modes repeat steps 4 – 8
above.
10.
To apply and save the changes click on the
OK
button in the Remote Panel Setup window.
11.
In the main PixMaster Show Editor window, click
on the
Save Show
button.
4.11.8
4.11.8 Remote Panel Operation
As each Remote Panel connects to a running Broadcast Pix show, the last selected
mode for each panel is recalled. Any panel may have access to all 22 modes.
To Set a Mode on the Remote Panel:
1.
On the Remote Panel, select and hold down the
[Shift]
button, it will illuminate
yellow. Then select the
[Lock]
button, as shown below.
This will put the Remote Panel into an offline setup mode, as shown below.
2.
Press the
[1]
input
PixButton labeled
Set Mode
, and the PixButtons will change
showing the Modes 1- 11 and an Exit button, as shown below.
3.
Select the desired
[Mode]
PixButton 1 through 11, to access modes 12-22
select the
[Shift]
button.
The Remote Panel will automatically connect to a running show with the newly
selected mode.
Set Panel Set Set Code Light Test Panel Join
Mode IP Svr IP Black Ver Show Pix Setup Shift The
Show
Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode Mode
1 2 3 4 5 6 7 8 9 10 11 Shift
Exit
Join
The
Show