install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
4.1.1 Accessing Inputs 17-32 with Shift
For shows that consist of more than 16 inputs, the [Shift] button is used to access
sources 17-32. This enables the Broadcast Pix panel to control twice as many
sources as there are buttons. These “shifted sources” are typically used for sources
that are used less frequently than the first 16 sources, such as a rarely used extra
tape deck, video feed and black.
To access a source in the 17-32 range on the Control Panel:
1.
In the transition section of Program Bus, press the
[Shift]
button.
It will illuminate orange and both display rows will change to the names of
sources 17-32. There is no need to hold down shift since the panel will
stay in the shifted state until it is deselected.
2.
Select a button from the Program, Preview or Source rows, as desired
.
The selected button will illuminate. To indicate that this button is in a
shifted state, on the control panel the button will blink on and off, while on
the SoftPanel a small light above the source button will illuminate red.
3.
Press the
[Shift]
button again.
This will turn off the illumination of the [Shift] button and return all source
buttons to their unshifted state. The control panel will continue to have
the selected source blinking and the small light on the SoftPanel will stay
on so you know a shifted source has been selected. Once a direct or
unshifted source is selected the blinking will stop.
4.1.1
To get access to sources 17-32