install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
4.
Select the desired
Mode
to modify either Mode
1 – Mode 11, the PixButton will highlight orange,
as shown on the right.
To select Modes 12-22 select the
View Modes
12-22
button, as shown on the right.
5.
The bottom window will update to show the
current state of the mode.
In the Switcher Inputs section, click on the
input
to enable or disable 1 through 11, the
PixButtons will update to Grey or Green, as
shown to the right.
Grey PixButtons signify that the input or output
is blocked and not accessible from the Remote
Panel. Green PixButtons signify that the input or
output is allowed for selection.
The inputs shown are the direct inputs to the
Mica Switcher and the names are automatically
created from the Mica Input Assignments
window. They may not be reordered.
6.
To assign a processed output like Program or
Preview to the A or B input buttons, click on the
A
or
B
button and a drop down menu will
appear, as shown on the right.
The list of available outputs from Mica Output
Assignments will appear, select the desired
output. The PixButton will update showing the
assigned output, as shown on the right
To access buttons C and D click on the
Shift
button and repeat this step.
4.11.7