Britax Strider Compact Page 48 Nstruction Manual Download

Page: 48 / 74

G Secure your baby into the

infant carrier with the

harness provided. (Refer

to instruction manual that

comes with infant carrier).

H To remove the infant carrier,

squeeze both handle

latches in to release the

locks. The indicator will now

be RED.

3.2 INFANT CARRIER FITTING & REMOVAL Cont...

C By squeezing in and

holding the latches on

either side of the handle,

rotate the handle

backwards. The GREEN

indicator will now turn to

RED.

D Release the handle

latches. Then with one

hand holding the front of

the infant carrier, push

the infant carrier handle

all the way down until

you hear it lock into the

frame.

E The handle indicator

should now be GREEN

and the infant carrier

should be locked into

the frame. If indicator is

RED the infant carrier

handle is not in the

locked position, repeat

step D

F Pull up on both sides of the

infant carrier and confirm it

is locked into the frame. If

not locked in on both sides,

repeat steps A to E.

CAUTION

Summary of Contents for Strider Compact











































































Search results

Summary of Contents for Strider Compact

Reviews:

Related manuals for Strider Compact

Brands by name

Popular brands

Britax Strider Compact, Nstruction Manual

Search results

Summary of Contents for Strider Compact

Reviews:

Related manuals for Strider Compact

Brands by name

Popular brands