Britax Strider Compact Page 51 Nstruction Manual Download

Page: 51 / 74

NOTE: For easier installation, rotate the pivotal handle in the most upright

position.

A Remove the accessory

bag if fitted. Apply the

stroller brake, rotate the

pivotal handle up to

create more assembly

space. Adjust the stroller

seat to the most upright

position.

C While holding the second

seat, hook the connecting

pins (SS2) into the frame

mouldings (S28), then pull

downwards.

SS2

4.3 FITTING SECOND SEAT TO THE STROLLER

IMPORTANT NOTES:

PLEASE REFER TO PAGE 11 FOR LIFTING TECHNIQUES.
• WHEN FITTING, OPENING OR FOLDING THE SECOND SEAT, BE AWARE OF

THE DANGER OF BEING INJURED BY MOVING PARTS AND LOCKING

DEVICES DURING THE PROCESS. KEEP ALL HANDS AND LIMBS CLEAR OF

THESE PARTS.

• THERE IS POTENTIAL FOR FINGERS OR PARTS OF THE BODY TO BE

INJURED WHEN THE STROLLER IS BEING FOLDED OR UNFOLDED, DUE

CARE SHOULD BE EXERCISED.

• KEEP CHILDREN CLEAR OF THE STROLLER DURING FOLDING OF THE

STROLLER.

B The second seat

connecting pins (SS2)

need to lock into the frame

mouldings (S28). Hold the

second seat frame so the

leg tube (SS9) is

underneath and facing the

second seat.

CAUTION

S28

SS9

SS2

S28

Summary of Contents for Strider Compact











































































Search results

Summary of Contents for Strider Compact

Reviews:

Related manuals for Strider Compact

Brands by name

Popular brands

Britax Strider Compact, Nstruction Manual

Search results

Summary of Contents for Strider Compact

Reviews:

Related manuals for Strider Compact

Brands by name

Popular brands