manualshive.com logo in svg

Britax Strider Compact, Nstruction Manual

Share
Download
Britax Strider Compact Nstruction Manual Download Page 68

Note: To create more space when the infant carrier is installed on the second seat 

frame, you can use the adaptors on the stroller frame to support the stroller seat or 

second infant carrier.

4.16 FITTING & REMOVING INFANT CARRIER 

        FROM SECOND SEAT FRAME cont... 

G   The handle indicator

      should now be GREEN

      and the infant carrier

      should be locked into the

      frame. If indicator is RED

      the infant carrier handle is

      not in the locked position,

      repeat steps E & F.  

H   IMPORTANT: Pull up on

      both sides of the infant

      carrier and confirm it is

      locked into the frame. If

      not locked in on both

      sides, repeat steps E to

      G.        

I   Secure your baby into the

    infant carrier by the

    harness provided. (Refer to 

    the instruction manual

    which comes with the infant

    carrier).                   

J   To remove the infant carrier,

     squeeze both handle

     latches in to release the

     locks. The indicator will now 

     be RED. Rotate the handle

     forward.                 

K   Continue to rotate the

      handle forward until it

      returns to the upright

      position. Release the

      latches, the indicator

      should now be GREEN.

L   Lift and remove the infant

     carrier away from the

     second seat frame.   

68

Summary of Contents for Strider Compact











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands