Britax Strider Compact Nstruction Manual Download

Page: 62 / 74

E A gentle upward, then

forward motion (as

indicated by the arrow) will

be required to release the

second seat connecting

pins (SS2) out of the frame

mouldings (S28).

F Lift the second seat out

and away from the frame.

SS2

D The adjacent buttons pop

out of the mouldings when

the release buttons are

fully depressed.

NOTE: Adaptors are supplied to create more space if required, when using the

scond seat or infant carrier on second seat frame.

B Press down on the

adaptors to lock into the

stroller frame mouldings

(S8).

A Align the adaptor with the

stroller frame mouldings as

the adaptor extends

towards the front of the

stroller and the ribbed

section of the mouldings

face inwards.

4.12 TO USE THE ADAPTORS

4.11 REMOVING THE SECOND SEAT FROM THE

STROLLER FRAME Cont...

S28

Summary of Contents for Strider Compact











































































Search results

Summary of Contents for Strider Compact

Reviews:

Related manuals for Strider Compact

Brands by name

Popular brands

Britax Strider Compact, Nstruction Manual

Search results

Summary of Contents for Strider Compact

Reviews:

Related manuals for Strider Compact

Brands by name

Popular brands