manualshive.com logo in svg

Britax Strider Compact, Nstruction Manual

Share
Download
Britax Strider Compact Nstruction Manual Download Page 42

IMPORTANT NOTES:

•  

THE STRIDER AND STRIDER PLUS BASSINETS ARE THE ONLY BASSINETS

   DESIGNED TO FIT THE COMPACT STROLLER.

•  REMOVE THE STROLLER SEAT OR INFANT CARRIER FROM THE FRAME

   BEFORE FITTING BASSINET.

•  ALWAYS REMOVE YOUR CHILD FROM THE BASSINET BEFORE FITTING OR

   REMOVING FROM THE STROLLER FRAME.

•  THE BASSINET MUST ALWAYS FACE TOWARDS THE HANDLE.

•  THE BASSINET MUST BE REMOVED FROM THE FRAME BEFORE FOLDING.

•  DO NOT LIFT THE STROLLER BY THE BASSINET.

WARNINGS:

•  DO NOT USE THE BASSINET ONCE THE CHILD CAN SIT UP.

•  IT IS UNSAFE TO USE ACCESSORIES NOT APPROVED FOR USE WITH THIS

   STROLLER.

•

   

DO NOT USE ANY ACCESSORIES OTHER THAN THOSE APPROVED FOR

   USE WITH THIS STROLLER BY BRITAX.

•  THE MAXIMUM WEIGHT OF THE CHILD USING THIS PRODUCT IS NOT TO

   EXCEED 9KGS.

2.2 BASSINET PARTS

Bassinet

Frame

Bassinet

Liner

Bassinet

Mattress

Bassinet

Boot cover

2.1 BASSINET WARNINGS & IMPORTANT NOTES

      (Bassinet sold separately)

42

Summary of Contents for Strider Compact











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands