Britax Strider Compact Page 18 Nstruction Manual Download

Page: 18 / 74

D Now thread each hook

and loop tab through the

frame moulding brackets

as shown.

NOTE: Remove the bag when using the second seat.

E Attach each strap to

the hook and loop tab

sewn onto the bag to

hold in place.

F The accessory bag is now

ready for use.

1.11 TO FIT THE ACCESSORY BAG Cont...

1.12 FITTING THE STROLLER SEAT TO THE FRAME

A Hold the Stroller seat over the frame.

B Align the Stroller seat mouldings on

both sides, over the frame connection

sockets located in the middle of the

stroller.

NOTE: The seat is reversible so it can face in either forward or

rearward position.

CAUTION

IMPORTANT NOTE:

ALWAYS REMOVE YOUR CHILD FROM THE STROLLER SEAT BEFORE

INSTALLING, REMOVING OR CHANGING SEAT DIRECTION.

Summary of Contents for Strider Compact











































































Search results

Summary of Contents for Strider Compact

Reviews:

Related manuals for Strider Compact

Brands by name

Popular brands

Britax Strider Compact, Nstruction Manual

Search results

Summary of Contents for Strider Compact

Reviews:

Related manuals for Strider Compact

Brands by name

Popular brands