manualshive.com logo in svg

Britax Strider Compact, Nstruction Manual

Share
Download
Britax Strider Compact Nstruction Manual Download Page 2

INDEX

Stroller Features.................................................................................

Quick Reference Guide to Compact Single Mode Configurations......
Quick Reference Guide to Compact Double Mode Configurations.....

1 Stroller............................................................................................

1.1 

Stroller Important Notes & Warnings...........................................

1.2 

Manual Handling Techniques.............................................................

1.3 

Stroller Parts........................................................................................

1.4 

Stroller frame opening........................................................................

1.5 

To fit and remove the wheel guards..................................................

1.6 

Rear wheel fitting and removal..........................................................

1.7 

Front wheel fitting and removal.........................................................

1.8 

Swivel/fixed front wheel operation.....................................................

1.9 

To operate the brake..........................................................................

1.10  To adjust the pivotal handle - 7 positions.........................................

1.11  To fit the accessory bag....................................................................

1.12  Fitting the stroller seat to the frame..................................................

1.13  To fit the arm bar................................................................................

1.14  Adjusting the backrest........................................................................

1.15  Stroller seat removal..........................................................................

1.16  To face the seat in opposite direction...............................................

1.17  To fit, use and remove the canopy....................................................

1.18  Harness adjustment...........................................................................

1.19  Tether strap.........................................................................................

1.20  Fitting the seat pad.............................................................................

1.21  To fit the shoulder pads...................................................................

1.22  Adjusting the leg support...................................................................

1.23  Fitting the boot cover..........................................................................

1.24     To use the basket...............................................................................

1.25  Fitting the mesh cover........................................................................

1.26  Fitting the rain cover...........................................................................

1.27  To use the stroller...............................................................................

1.28  To fold/close the Stroller....................................................................

1.29  To lift and carry the Stroller................................................................

Notes................................................................................................... 40

 

2

4
6

7
8

9 & 10
11

12

13

14

14

15

16

16

17

17 & 18

18 & 19

19 & 20

20 & 21

21

22

23 & 24

25 - 27

28

29

29

30

30

31

31 & 32

33 & 34

35

36 - 39

39

 

Summary of Contents for Strider Compact











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands