manualshive.com logo in svg

Britax Strider Compact, Nstruction Manual

Share
Download
Britax Strider Compact Nstruction Manual Download Page 66

SS9

SS9

4.15 FITTING & REMOVING SOFT GOODS FROM

        THE SECOND SEAT FRAME cont... 

SS2

G   Release the hook and

      loop tabs on both sides.

H   Release hook and loop

      tab.

I     Pull the fabric pocket off

      from both button frame

      posts.

J   Pull the fabric clear of the

     mouldings and pull the

     fabric off the frame. The

     following steps explain

     how to fit the second seat

     frame to the stroller.

    

K   The second seat

      connecting pins (SS2)

      need to lock into the frame

      mouldings (S28). Hold the

      second seat frame so the

      leg tube (SS9) is

      underneath and facing

      the head end of the

      second seat.

L    Hold the second seat and

      hook the connecting pins

      (SS2) into the stroller

      frame mouldings (S28),

      then pull downwards.

66

S28

Summary of Contents for Strider Compact











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands