Britax Strider Compact Page 14 Nstruction Manual Download

Page: 14 / 74

A Position the left and right

guards beside the frame as

shown.

B Fit each guard onto the

moulding at the base of the

leg tubes.

Push down until they

lock into position.

C Pull on each guard in the

direction shown, to make sure

they are locked on correctly.

A To fit the rear wheels,

align the wheel axle/rod

with the hole in the wheel

moulding. Press in and

hold the central button,

then push the rear wheel

fully into the wheel

moulding.

B Release the central

button, then pull on the

rear wheel to make sure

it is locked on. Repeat

steps A & B to fit the

other rear wheel.

C To release the rear

wheels, press in and hold

the central button. Then

slide the wheel out and

remove.

Repeat for the other side.

1.5 FIT & REMOVE THE WHEEL GUARDS

1.6 REAR WHEEL FITTING & REMOVAL

Summary of Contents for Strider Compact











































































Search results

Summary of Contents for Strider Compact

Reviews:

Related manuals for Strider Compact

Brands by name

Popular brands

Britax Strider Compact, Nstruction Manual

Search results

Summary of Contents for Strider Compact

Reviews:

Related manuals for Strider Compact

Brands by name

Popular brands