Britax Strider Compact Nstruction Manual Download

Page: 60 / 74

4.10 FOLDING THE SECOND SEAT WITH THE

STROLLER FRAME Cont...

IMPORTANT NOTE:

INCORRECT FOLDING MAY CAUSE DAMAGE TO THE STROLLER AND FRAME.

PLEASE FOLLOW THE FOLDING INSTRUCTIONS CAREFULLY.

NOTE: When folding the stroller with the second seat attached, you must

adjust the stroller pivotal handle to the regular or highest position (see section

1.10), to prevent the handle from coming in contact with the second seat and

causing damage to the stroller.

HIGHEST POINT

REGULAR POINT

LOWEST POINT

A Fold the canopy back, then fully lift up the backrest adjusting lever and lower the second

seat to the lowest position.

IMPORTANT NOTE:

ALWAYS REMOVE YOUR CHILD FROM THE SECOND SEAT BEFORE FOLDING OR

REMOVING THE SECOND SEAT.

FOLD THE SECOND SEAT BEFORE FOLDING THE STROLLER.

Summary of Contents for Strider Compact











































































Search results

Summary of Contents for Strider Compact

Reviews:

Related manuals for Strider Compact

Brands by name

Popular brands

Britax Strider Compact, Nstruction Manual

Search results

Summary of Contents for Strider Compact

Reviews:

Related manuals for Strider Compact

Brands by name

Popular brands