manualshive.com logo in svg

Britax Strider Compact, Nstruction Manual

Share
Download
Britax Strider Compact Nstruction Manual Download Page 47

3.2 INFANT CARRIER FITTING & REMOVAL

PLEASE NOTE: FOR PROPER USE OF THE INFANT CARRIER IN

THE CAR, PLEASE FOLLOW THE INSTRUCTION BOOK

PROVIDED WITH THE INFANT CARRIER.

•     THE SUN IS VERY STRONG. DO NOT LEAVE YOUR CHILD

      EXPOSED TO THE SUN. THE CANOPY OR HOOD ON THIS

      PRODUCT WILL NOT GIVE YOUR CHILD TOTAL PROTECTION

      FROM THE HARMFUL RAYS OF THE SUN.     

A   Remove Stroller seat or Bassinet from frame, (See sections 1.15 (B) & 2.3

      (O)). The Infant Carrier must face the Stroller handle. With the Infant Carrier

      handle in the upright position, locate the infant carrier handle mouldings on

      either side, directly over the frame mouldings. Notice the indicator is

      GREEN. 

B   Push down on the infant carrier and make sure it

      is located in the frame mouldings. The infant 

      carrier now needs to be locked securely in frame.

3.1 INFANT CARRIER WARNINGS & IMPORTANT

      NOTES Cont... (Purchased Separately)

PLEASE REFER TO PAGE 11 FOR SMART LIFTING TECHNIQUES.

47

Summary of Contents for Strider Compact











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands