Britax Strider Compact Page 3 Nstruction Manual Download

Page: 3 / 74

INDEX

Optional Accessories (Bassinet, Infant Carrier & Second Seat)......

2.1 Bassinet Important Notes & Warnings..........................................

2.2 Bassinet Parts.....................................................................................

2.3 Bassinet assembly, fitting & removal.................................................

3.1 Infant Carrier Important Notes & Warnings..................................

3.2 Infant Carrier fitting and removal.......................................................

4.1 Second Seat Important Notes & Warnings...................................

4.2 Second Seat Parts..............................................................................

4.3 Fitting Second Seat to the stroller......................................................

4.4 Adjusting the backrest.........................................................................

4.5 To fit, use and remove the canopy.....................................................

4.6 Harness adjustment............................................................................

4.7 Adjusting the head pillow height position..........................................

4.8 To fit the shoulder pads......................................................................

4.9 Fitting the Boot Cover.........................................................................

4.10 Folding the Second Seat with the frame............................................

4.11 Removing the Second Seat from the frame.......................................

4.12 To use the adaptors.............................................................................

4.13 Install the Stroller Seat using the adaptors........................................

4.14 Install the Infant Carrier using the adaptors.......................................

4.15 Fitting and removing Soft Goods from the second seat frame.........

4.16 Fitting and removing Infant Carrier from the second frame..............

4.17 Refit and remove the soft goods to the Second Seat frame.............

Stroller Folding Configurations........................................................

Care & Maintenance.........................................................................

Notes.................................................................................................73

41
42

43 - 45

46 & 47

47 - 49

51 & 52

55 - 57

59 - 61

61 & 62

62 & 63

65 & 66

67 & 68

69 & 70
71
72

Summary of Contents for Strider Compact











































































Search results

Summary of Contents for Strider Compact

Reviews:

Related manuals for Strider Compact

Brands by name

Popular brands

Britax Strider Compact, Nstruction Manual

Search results

Summary of Contents for Strider Compact

Reviews:

Related manuals for Strider Compact

Brands by name

Popular brands