manualshive.com logo in svg

Britax Strider Compact, Nstruction Manual

Share
Download
Britax Strider Compact Nstruction Manual Download Page 25

1.18 HARNESS ADJUSTMENT

25

Raised Rib

NOTE: Each waist buckle tongue has a raised rib

on one side and can only be locked into the

buckle assembly with the raised rib facing up.

Shoulder straps

Waist straps

Waist straps

A

A

B

B

Crotch strap

Buckle

Assembly

A Set parking brake. Place child in seat. Slip one

shoulder strap over each shoulder.

Position crotch strap between legs. Push the

buckle tongues (A) on waist straps through the

tongue guides (B) on shoulder straps. 

A

•   A five point harness is provided to restrain your child.

•   Buckle tongues separate for added safety.

•   To reconnect buckle tongues and to secure the child in the harness please

    follow the steps below carefully.

•   ENSURE YOUR CHILD IS SECURED WITH A CORRECTLY ADJUSTED

    HARNESS.

•   THE ADJUSTED HARNESS SHOULD CLOSELY FIT THE CHILD.

•   NEVER LEAVE THE HARNESS BUCKLED WHEN NOT FITTED TO A CHILD IN

    THE STROLLER, BECAUSE THE HARNESS CAN FORM LOOPS WHICH MAY

    POSE A STRANGULATION HAZARD.

•   WHEN HARNESS IS NOT IN USE, DISCONNECT SHOULDER STRAPS FROM

    THE WAIST STRAPS AND BUCKLE TO PREVENT STRANGULATION.

WARNING:

 

USE THE HARNESS AT ALL TIMES.

Summary of Contents for Strider Compact











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands