Warranty Registration and Pre-Delivery Inspection Forms
•
The Dealer must complete and send to Brandt a Warranty Registration form for each new Brandt
Product sold by the Dealer, within 30 days of delivery to customer, to ensure that the machine is
eligible for warranty. Warranty Registrations must be accompanied by a completed and signed Pre-
Delivery Inspection (PDI) form which is filled out upon completion of the Pre-Delivery Inspection at
time of sale. Machines that do not have Warranty Registration
and
a copy of the PDI forms registered
on file with Brandt will not receive any warranty labor or parts compensation until such documents are
completed and filed with Brandt. Triplicate copies of the Warranty Registration as well as the Pre-
Delivery Inspection forms are included inside the Operator’s Manual supplied with each Brandt Product.
Warranty Policy Definitions
•
“Free from Defects in Material and Workmanship”
A failure of a part caused by the part itself with no abnormal external influences is a defect. An example
would be a hydraulic hose that has been shipped from the Brandt factory with a pin hole leak.
A failure caused by abnormal external force acting on a part is not a defect. For example, an auger
flight bent or broken by a rock picked up while cleaning grain off the ground is not considered defective.
•
“Normal Use and Service”
Each product from Brandt has an intended use which is advertised through our brochures and videos.
A failure occurring due to an unusual condition or operation not specifically represented by Brandt will
not be warranted.
•
“Operated in Accordance with Factory Instructions”
The Operator’s Manual supplied with each Brandt Product gives instructions on safe, optimal, productive
operation of the machine. Shortcuts in operation or disregard for these instructions may cause damage
to the unit, which will not be warranted.
Failure caused by misuse, accident or by a lack of required normal maintenance as specified in the
Operator’s manual will void warranty. Damage as a result of accident or shipping would not be
considered a defect and therefore not warrantable. Failures due to improper adjustment not checked
on the pre-delivery inspection are not considered defects.
THE EXPRESS WARRANTIES OUTLINED ARE EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES, CONDITIONS AND TERMS AS TO QUALITY, FITNESS OR
PERFORMANCE OF THE GOODS, WRITTEN, ORAL OR IMPLIED, STATUTORY OR
OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR
CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
AND ALL SUCH OTHER WARRANTIES, CONDITIONS AND TERMS ARE HEREBY
DISCLAIMED AND EXCLUDED.
Summary of Contents for GRAIN VAC 5000
