Brandt GRAIN VAC 5000, Operator And Parts Manual

Page: 35 / 104

34
4.4 Service Record
Use this table to record the service work done to the machine. See lubrication section for details of
service.
Table Codes
C - Check L - Lubricate
4.3 Service Intervals
These service intervals are listed in addition to the
new machine break in items as described in the first
operation section on page 19.
8 Hours or Daily
1. Lubricate the PTO driveline telescoping
members
2. Auger hinge Pivots
3. Fan Idler Pivot
4. Flight Bearings - EX Model only
5. Check fan drive belt tension. See Sec. 5.1.
6. Check auger drive chain tension. See Sec. 5.3
20 Hours or Weekly
1. Lubricate PTO slip clutch. See Fig. 14.
2. Grease main driveline bearings as well as lower
drive bearings and lower flight bearing.
3. Lubricate auger drive chains. A commercial
aerosol chain lube is recommended.
4. Check oil level in Fan Bearing Box.
50 Hours
1. Lubricate PTO Shaft U-Joints.
2. Change Oil in Bearing Box - 150 ml of 75W90
Synthetic Gear Oil
100 Hours or Annually
1. Check wheel bearing tightness, repack if
necessary.
2. Check oil in gearbox.
3. Check the Fan and Housing condition.
Hours
S ervic ed by, Initial
Service Schedule
8 hours or Daily
L P TO Teles coping M em bers
L A uger Hinge P ins
L B elt Idler Hinge P in
L Flight B earings - E X Model Only
C Fan Drive B elt Tension
C A uger Drive Chain Tens ion
20 Hours or W eekly
L P TO S lip Clutc h
L Oil A uger Drive Chain
L B earings on P rimary Drive S haft
L B earing on Lower A uger
C Oil Level in Fan B earing B ox
50 Hours or W eekly
L P TO Universal Joints
Change Oil in B earing B ox
100 Hours or Annually
C Oil Level in Gearbox