Brandt GRAIN VAC 5000, Operator And Parts Manual

Page: 27 / 104

26
one 7’ Steel Flex Hose - 1 Spring Clip moved on MaxFlo
Nozzle
one 7’ Steel Flex & one 3.5’ Steel Flex Hose - 2 Spring
Clips moved on MaxFlo Nozzle
two 7’ Steel Flex Hoses - 3 Spring Clips moved on MaxFlo Nozzle
two 7’ Steel Flex & one 3.5’ Steel Flex Hose - 4 Spring Clips
moved on MaxFlo Nozzle
F
IG
. 9 A
DDING
H
OSE AND
M
OVING IN AN
A
RC
A
CROSS THE
B
IN
D. Optional Adjustable Bin Snake
To ensure ease of use during bin cleanup situations
your new Grain Vac can be equipped with an
optional adjustable height Bin Snake. This will ensure
that the bin snake can accommodate most any bin
door height.
1. To raise the height of the Bin Snake assembly
simple lift the latch handle and slide the snake
upward to match your bin door.
2. Once the desired height has been reached,
simply latch the handle back into one of the
adjustment holes as indicated in Figure 10.
F
IG
. 10 A
DJUSTABLE
H
EIGHT
B
IN
S
NAKE
Latch Handle
5. Move the hose in an arc, from side to side in the
bin. See Fig. 9. Add only 3.5’ of hose at a time
when required.
6. Continue moving grain until you have reached
the back of the bin. Use the steel flexible hoses
as long as possible to maximize capacity and
minimize wear. Use straight solid sections when
ever possible.
7. After you have reached the back of the bin with
the MaxFlo Nozzle, remove the last section of
steel hose and the MaxFlo Nozzle. Attach the
flexible rubber hose and the Cleanup Shovel and
proceed with final cleanup.
8. Start cleaning at the back of the bin and work
your way forward, toward the door. Clean
directly in front of the door last. You can remove
sections of flexible steel hose as you get closer
to the door.
The MaxFlo Full Bin Nozzle should
be used in all grain moving situations
except for final floor cleanup.