1
2
3
4
5
6
7
MACERATOR OPERATION:
There is a switch on the DC side of the MDP electrical
panel marked “MACERATOR” that needs to be ON
before discharging the holding tank. The overboard dis-
charge seacock must be OPEN prior to operation.You
are now ready to use the keyswitch located on the wall
behind the vacu-flush toilet. The keyswitch is a momen-
tary type, which means that it needs to be held during
the discharge cycle. Turning the keyswitch clockwise will
discharge the contents of the holding tank through the
macerator pump; which processes it before evacuating
it overboard.
There are bodies of water where discharge of raw
sewage is prohibited. Keep seacock lock engaged
when in waters where discharge is not permitted.
MAINTENANCE:
After long periods of non-use, the macerator pump may
not turn freely. Regular use of the system will
Section 6 - Water & Waste System
305 Conquest-Owner’s Manual
Standard Waste System Diagram
1
VacuFlush® Toilet
2
Waste Discharge Hose to Holding Tank
3
Vent from Holding Tank
4
Shoreside Discharge Hose & Deck Fitting
5
Vacuum Generator & Holding Tank
6
Macerator
7
Discharge Line from Macerator
8
Lockable Discharge Seacock
reduce the chances of this occuring. If the system does
require maintenance contact your nearest dealer for
more information. Because your waste system is a low
water use device, there is special paper that must be
used to prevent clogs. The manufacturer has provided
information regarding the type of paper that must be used.
NEVER use residential tissue paper in your marine waste
system.
8
Overboard discharge
seacock, (Shown in the
OPEN position. Turn
handle counterclock-
wise to CLOSE). Lock
with padlock (not sup-
plied).
49
