Section 8 - Getting to know your Boston Whaler
305 Conquest-Owner’s Manual
RIGGING THE HULL:
There is a nylon cord that runs from the console, down
the starboard gunwale and exits out of the aft starboard
section of the cockpit machinery compartment. The cord
at this end is approximately 6ft.(1.82m). The rigging hose
is 2 inches in diameter. This diameter will be important
as the rigging tube gets more populated. To allow for
more electrical accessories to be run through the rigging
tube at a later date; tie another piece of nylon cord to
the current accessory wiring being run and use that for
later runs.
Machinery Access
Compartment
Console Access
1/8” Nylon Cord
to Stern
64
