Section 2 - General Arrangement & Specifications
305 Conquest-Owner’s Manual
12
The deck drain provides self-bailing capabilities while the
boat is static in the water and no passengers on board.
This feature prevents the accumulation of water in the
cockpit. the drain must be in place when underway.
NOTICE
!
Depending on the type of boat you have, you may
have underwater fittings that need drain plugs.
Garboard drain plugs and fishbox drain plugs need
to be in place before the boat goes into the water.
Any fitting that will be underwater needs to be
plugged or the seacock needs to be closed
NOTICE
!
Through hull fittings should be checked for proper
seal annually. When the boat is in the water the un-
derwater fittings can be checked for dripping. It is
recommended that the underwater fittings be re-
moved, cleaned and resealed every other year.
NOTICE
!
If the through hull fittings need to be replaced, it is
recommended that an authorized Boston Whaler ®
dealer perform this type of repair. Through hull fit-
tings that are improperly installed can cause pre-
mature hull failure and may void the Boston Whaler®
limited warranty.
NOTICE
!
305 Conquest Through-Hull fittings
1
Anchor Locker Drain, Port
2
Galley Sink Drain
3
Deck Drain
4
Generator Exhaust (optional)
5
Fishbox Pumpout
6
Fishbox Drain
7
Generator Raw Water Pump Inlet, (optional)
8
Raw Water Washdown Pump Inlet
9
Anchor Locker Drain
10
A/C Discharge, (optional)
11
1100 GPH Forward Bilge Pump Overboard Drain
12
Head Compartment Sink Drain
13
Shower Sump Drain
14
Waste Tank Vent
1
2
8
6
3
4
5
9
10
11
12
13
22
23
24
7
15
A/C System Raw Water Inlet, (optional)
16
Macerator Pump Outlet
17
Starboard Fishbox Drain
18
Deck Drain
19
Emergency High Water Pump Drain
20
2000 GPH Aft Bilge Pump Overboard Drain
21
Fishbox Pumpout
22
Livewell Drain
23
Motorwell Drains
24
Garboard Drain
14
15
17
18
19
20
16
21
