Boss Audio Systems Digital Recording Studio BR-1600 CD, Owner'S Manual

Page: 157 / 312

157
Creating drum patterns
Section 3
Correcting drum patterns
(Microscope)
Microscope is used to make detailed corrections to drum
patterns. In specific terms, this function displays a drum
pattern’s performance data in list format so that any of the
corresponding parameters can be corrected as required.
1.
Press [F3] (MICROSCOPE) on the Drum Pattern Edit
screen.
The Microscope screen will appear.
fig.20-025d
Performance data is displayed on this screen as follows.
fig.20-026d_drumsevent.bmp
2.
Move the cursor to the item of performance data to be
modified.
fig.20-026ad
3.
Modify the performance data as described below.
To change a drum sound:
1) Move the cursor to the drum sound field.
fig.20-026bd
2) Select a new drum sound using the TIME/VALUE dial.
The performance data will be updated with this new
drum sound setting.
To change a drum’s volume:
1) Move the cursor to “ACC” field.
fig.20-026cd
2) Set a new velocity value using the TIME/VALUE dial.
Larger velocity values produce higher volumes and vice
versa.
To change a drum’s gate time:
1) Move the cursor to “GATE” field.
fig.20-026dd
2) Set a new value using the TIME/VALUE dial.
The performance data will be updated with this new
gate time setting.
To move an item of performance data:
1) Press [F2] (MOVE).
fig.20-026ed
2) Use the TIME/VALUE dial to select the time position
to which the performance data is to be moved.
3) Press [ENTER/YES].
The performance data will be moved to this new
position.
Location Drum tone
Accent
(Velocity)
Note number
Gate time
(the length of time from when the note
begins to the time it stops playing)
• When the BR-1600CD’s internal drum sounds are
being played, the Gate Time setting is ignored and
all sounds continue for the same amount of time;
accordingly, the Gate Time setting may be left at “1.”
• When the BR-1600CD is playing drum sounds by
transmitting MIDI data to an external drum machine
connected to the MIDI OUT port, it is important that
the gate time be set to match the specifications
described in the drum machine’s manual.
BR-1600_R_e.book 157 ページ ２００７年１２月６日 木曜日 午前９時５２分