HD Conference Dome
Configuring the HD Conference Dome | en
139
Bosch Security Systems, Inc.
Installation Manual
F.01U.265.806 | 1.0 | 2012.03
HTTP browser port
Select a different HTTP browser port from the list if required.
The default HTTP port is 80. If you want to allow only secure
connections via HTTPS, you must deactivate the HTTP port. In
this case, select
Off
.
HTTPS browser port
If you wish to allow browser access on the network via a secure
connection, select an HTTPS browser port from the list if
necessary. The default HTTPS port is 443. Select the
Off
option
to deactivate HTTPS ports; only unsecured connections will
now be possible.
The HD Conference Dome uses the TLS 1.0 encryption
protocol. You may have to activate this protocol via your
browser configuration. You must also activate the protocol for
the Java applications (via the Java control panel in the
Windows control panel).
You can activate and configure encryption of the media data
(video and metadata) on the
Encryption
page (see
Section 12.52 Encryption, page 146
).
RCP+ port 1756
To exchange connection data, you can activate the unsecured
RCP+ port 1756. If you want connection data to be transmitted
only when encrypted, select the
Off
option to deactivate the
port.
CAUTION!
Multicast operation is only possible with the UDP protocol. The
TCP protocol does not support multicast connections.
The MTU value in UDP mode is 1,514 bytes.
NOTICE!
If you want to allow only secure connections with SSL
encryption, you must select the
Off
option for each of the
parameters
HTTP browser port
,
RCP+ port 1756
and
Telnet
support
. This deactivates all unsecured connections.
Connections will then only be possible via the HTTPS port.
