HD Conference Dome
Configuring the HD Conference Dome | en
141
Bosch Security Systems, Inc.
Installation Manual
F.01U.265.806 | 1.0 | 2012.03
Host name
Enter the host name registered on DynDNS.org for the HD
Conference Dome here.
User name
Enter the user name you registered at DynDNS.org here.
Password
Enter the password you registered at DynDNS.org here.
Force registration now
You can force the registration by transferring the IP address to
the DynDNS server. Entries that change frequently are not
provided in the Domain Name System. It is a good idea to force
the registration when you are setting up the device for the first
time. Only use this function when necessary and no more than
once a day, to avoid the possibility of being blocked by the
service provider. To transfer the IP address of the HD
Conference Dome, click the
Register
button.
Status
The status of the DynDNS function is displayed here for
information purposes. You cannot change any of these settings.
12.49
Advanced
The settings on this page are used to implement advanced
settings for the network.
Some changes only take effect after the unit is rebooted. In this
case, the
Set
button changes to
Set and Reboot
.
1.
Make the desired changes.
2.
Click the
Set and Reboot
button. The HD Conference
Dome is rebooted and the changed settings are activated.
SNMP
The HD Conference Dome supports the SNMP V2 (Simple
Network Management Protocol) for managing and monitoring
network components, and can send SNMP messages (traps) to
IP addresses. The unit supports SNMP MIB II in the unified
