74
en | Using the IP Interface
HD Conference Dome
F.01U.265.806 | 1.0 | 2012.03
Installation Manual
Bosch Security Systems, Inc.
1.
If you want to delete the entries, click the delete icon in
the top right-hand corner of the relevant field.
2.
If you want to view a detailed log, click the icon in the top
right-hand corner of the relevant field. A new window will
open.
11.5.1
Entering a Keyboard Control Command
The Aux Control tab is used to enter keyboard control
commands. These commands are composed of a command
number plus the appropriate function key (Show Shot, Set Shot
Aux On or Aux Off). A valid combination either issues a
command to the camera or displays an on-screen menu.
Aux Control Tab
The Aux Control tab is used to enter pre-programmed keyboard
control commands.
To access the Aux Control tab, navigate to the Livepage and
click the Aux Control tab (see
Figure 11.3
below).
Figure 11.3
Aux Control Tab
1
Command number field
2
Keypad (numbers 0-9)
3
Show a preset shot
4
Set a preset shot
5
Initiates a command
6
Deletes a number in the Command Number field
7
Used to select a menu item
8
Stops a command
