HD Conference Dome
Configuring the HD Conference Dome | en
121
Bosch Security Systems, Inc.
Installation Manual
F.01U.265.806 | 1.0 | 2012.03
2.
Click the date you wish to delete.
3.
Click
OK
. The item will be deleted from the table and the
window will close.
4.
The process must be repeated for deleting additional days.
Time periods
You can change the names of the recording profiles.
1.
Click a profile and then the
Rename
button.
2.
Enter your chosen name and then click the
Rename
button
again.
Activating the Recording
After completing configuration you must activate the recording
scheduler and start the recording. The configuration can be
modified at any time.
You can stop the recording activity at any time and modify the
settings.
1.
Click the
Start
button to activate the recording scheduler.
2.
Click the
Stop
button to deactivate the recording
scheduler. Running recordings are interrupted.
Recording status
The graphic indicates the recording activity of the HD
Conference Dome. You will see an animated graphic while
recording is taking place.
12.36
Recording Status
Certain details on the recording status are displayed here for
information purposes. You cannot change any of these settings.
12.37
Advanced Mode: Alarm
12.38
Alarm Connections
You can select how the HD Conference Dome responds to an
alarm. In the event of an alarm, the unit can automatically
connect to a pre-defined IP address. You can enter up to ten IP
