46
en | Installing a Pipe Mount
HD Conference Dome
F.01U.265.806 | 1.0 | 2012.03
Installation Manual
Bosch Security Systems, Inc.
3.
Drill the four (4) holes in the installation location, screws
not supplied, use a minimum screw length of 10 mm
(.39 in.).
4.
Drill a fifth hole (maximum of 20 mm [.79 in.]) in the
center of the four-hole pattern used to mount the flange.
Use this hole to feed the wires through the mount.
5.
Pull the wires from the pipe, starting at the flange end.
Figure 7.3
Attach Pendant Pipe Mount to Ceiling
CAUTION!
All wires for installation applications must be routed through a
grounded conduit.
NOTICE!
The fasteners and mounting surface must be capable of
supporting a maximum load of 11.33 kg (25 pounds).
CAUTION!
Select a rigid mounting location to prevent excessive vibration
to the HD Conference Dome Camera.
