HD Conference Dome
Configuring the HD Conference Dome | en
117
Bosch Security Systems, Inc.
Installation Manual
F.01U.265.806 | 1.0 | 2012.03
12.33
Recording Profiles
You can define up to ten different recording profiles. You will
then use these recording profiles in the recording scheduler,
where they are linked with the individual days and times (see
Section 12.35 Recording Schedule, page 119
).
1.
Click one of the tabs to edit the corresponding profile.
2.
If necessary, click the
Default
button to return all settings
to their default values.
3.
Click the
Copy Settings
button if you want to copy the
currently visible settings to other profiles. A new window
will open and you can select the profiles in which you want
to copy the settings.
4.
For each profile, click the
Set
button to save the settings in
the unit.
Standard recording
Here you can select the mode for standard recordings.
f you select Continuous, the recording proceeds continuously. If
the maximum memory capacity is reached, older recordings will
automatically be overwritten. If you select the
Pre-alarm
option,
the device uses a special recording mode for optimal usage of
storage capacity: as soon as a time gap for alarm recording
begins, a recording is continuously made on one segment,
which is the size of a complete alarm sequence (pre- and post-
alarm time).
This segment functions in a similar manner to a ring buffer and
is overwritten until an alarm is actually triggered. Then,
recording occurs on the segment only for the duration of the
preset post-alarm time and a new segment is subsequently
used in the same manner.
If you select
Off
, no automatic recording takes place.
NOTICE!
You can change or add to the recording profile description on
the tabs on the
Recording Scheduler
page (see
Page 119
).
