76
en | Using the IP Interface
HD Conference Dome
F.01U.265.806 | 1.0 | 2012.03
Installation Manual
Bosch Security Systems, Inc.
11.6
Saving Snapshots
You can save individual images from the video sequence
currently shown on the
Livepage
in JPEG format on your
computer's hard drive. The icon for recording single images is
only visible if the unit is configured to enable this process.
Click the icon. The storage location depends on the
configuration of the HD Conference Dome.
11.7
Recording Video Sequences
You can save sections of the video sequence currently shown
on the
Livepage
on your computer's hard drive. The icon for
recording video sequences is only visible if the unit is
configured to enable this process.
1.
Click the icon to start recording. The storage location
depends on the configuration of the HD Conference Dome.
A red dot in the icon indicates that recording is in
progress.
2.
Click the icon again to stop recording.
3.
To change the storage location for the recorded video,
navigate to the Livepage settings on the Settings page.
Image Resolution
Sequences are saved at the resolution that has been preset in
the configuration for the encoder (see
Section 12.3 Basic Mode:
Network, page 83
).
NOTICE!
You can play back saved video sequences using the Player from
Bosch Security Systems, which can be installed from the
product CD supplied.
