HD Conference Dome
Configuring the HD Conference Dome | en
115
Bosch Security Systems, Inc.
Installation Manual
F.01U.265.806 | 1.0 | 2012.03
1.
Enter the IP address of the required iSCSI destination in
the
iSCSI IP address
field.
2.
If the iSCSI destination is password protected, enter this
into the
Password
field.
3.
Click the
Read
button. The connection to the IP address
will be established. In the
Storage overview
field, you can
see the corresponding logical drives.
Local Media
The supported local recording media are displayed in the
Storage overview field.
Activating and Configuring Storage Media
The storage overview displays the available storage media. You
can select individual media or iSCSI drives and transfer these to
the
Managed storage media
list. You can activate the storage
media in this list and configure them for storage.
1.
In the
Recording media
section, click the
iSCSI Media
and
Local Media
tabs to display the applicable storage media
in the overview.
2.
In the
Storage overview
section, double-click the required
storage medium, an iSCSI LUN or one of the other
available drives. The medium is then added to the
Managed storage media
list. In the
Status
column, newly
added media are indicated by the status
Not active
.
3.
Click the
Set
button to activate all media in the
Managed
storage media
list. In the
Status
column, these are
indicated by the status
Online
.
4.
Check the box in the
Rec. 1
or
Rec. 2
to specify which data
stream should be recorded on the storage media selected.
Rec. 1
stores Stream 1,
Rec. 2
stores Stream 2. This
CAUTION!
Each storage medium can only be associated with one user. If a
storage medium is already being used by another user, you can
decouple the user and connect the drive with the HD
Conference Dome. Before decoupling, make absolutely sure
that the previous user no longer needs the storage medium.
