24
en | Installing a Surface Mount
HD Conference Dome
F.01U.265.806 | 1.0 | 2012.03
Installation Manual
Bosch Security Systems, Inc.
3.
Secure the mounting plate to the junction box with the
user supplied hardware (see
Figure 4.3
).
Figure 4.3
Install the Mounting Plate
4.
Skip to
Section 4.1.3 Installing the Camera to the Mounting
Plate, page 24
, to continue the installation.
4.1.3
Installing the Camera to the Mounting Plate
To install the camera to the mounting plate for a surface or
suspended ceiling, do the following:
1.
Route wires on side of mounting plate with crescent
shaped cut-out (Ref. #2
Figure 4.3
).
2.
Attach grounding wire from unit to junction box.
3.
Attach user supplied ground to junction box.
4.
Connect the mating connectors with the flying leads to the
user supplied wiring (see
Section 8 Preparing the Wiring,
page 51
for wiring information).
1
Junction Box Holes
2
Cable Hole (40 mm maximum); Crescent Shape
3
Mounting Plate
4
Junction Box
121.16 mm
40 .0
mm
1.57 in.
4.77 in.
