High-speed Positioning System
Unpacking | en
13
Bosch Security Systems, Inc.
Installation Manual
F.01U.164.491 | 2.0 | 2010.03
2
Unpacking
This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all the parts listed in
Section 2.2 Parts List, page 13
are included. If any items are
missing, notify your Bosch Security Systems Sales or Customer Service Representative.
The original packing carton is the safest container in which to transport the unit and must be
used if returning the unit for service. Save it for possible future use.
2.1
Description
The Bosch High-Speed Positioning System is a complete, high-performance, high quality
solution that can pan 360 degrees continuously at speeds of up to 100 degrees per second.
An extensive range of options lets you tailor the system to your specific requirements. For
example, a wide variety of video cameras and lenses, including the optimized Dinion 2X
camera and zoom lens combinations, are available.
2.2
Parts List
The High Speed Positioning System includes the following components:
–
One (1) Unitized Pan Head (UPH) device
–
One (1) Camera/Lens Mounting Tray
–
The following Accessory Bags
–
Cable and Screws:
One (1) coaxial cable
Four (4) M4 x 10 mm screws; for tray mounting
Four (4) 4 mm washers; for tray mounting
Two (2) tie wraps, 102 x 2.5 mm
One (1) tie wrap, 180 x 3.5 mm
–
Power Connection:
One (1) 3 mm Allen wrench
Two (2) tie wraps, 102 x 2.5 mm
One (1) plastic tube (power wiring cover)
Two (2) conduit plugs for cable glands
One (1) safety label
–
Desiccant:
One (1) desiccant bag
One (1) mounting plate
Two (2) M4 x 10 mm screws self-tapping, galvanized (Zn)
One (1) 4 mm Allen wrench
–
One (1) instruction manual
–
One (1) box containing:
–
One (1) PTZ base with power supply and one (1) desiccant bag
–
Four (4) inox M5 x 20 mm screws, hexagonal head;
–
Four (4) washers/gaskets (2015 O-ring)
–
IR bracket with four (4) inox M5 x 14 mm screws, hexagonal head; four (4) M5 lock
washers UNI 1751; IR model only
