46
en | Configuring the System
High-speed Positioning System
F.01U.164.491 | 2.0 | 2010.03
Installation Manual
Bosch Security Systems, Inc.
The data is expressed as degrees per second.
Zoom dependent speed by default is turned off. When the zoom-dependent function is turned
off, then the pan and tilt speeds of the UPH are unaffected by the zoom measurement of the
camera/lens combination. If the zoom-dependent function is turned on, the zoom
measurement of the camera/lens combination affects the pan and tilt speeds. This is useful
when the zoom is in telephoto (i.e. zoomed in); it slows down the pan and tilt speeds so that
very fine adjustments can be made to follow moving subjects.
8.3.2
Limits
The
Limits
menu sets the movement limits for the UPH. These limits apply to all presets,
autopan and patrols, including manual operation of the UPH using the joystick. After the limits
are set in the OSD and the UPH moves into the “limited pan and tilt zone”, it will not move
outside of those limits until they are altered in the OSD or the UPH is reset. On reset, the UPH
returns to within the limited pan and tilt zone.
Feature
Description
Default
Options
PAN SPEED 1
Correspondence between
joystick position and UPH
speed. Joystick positions
have been divided into 7
levels for both axis (pan &
tilt); each level corresponds
to a defined speed which can
be modified by the user.
1.0
0.1-100.0*
PAN SPEED 2
2.0
0.1-100.0
PAN SPEED 3
5.0
0.1-100.0
PAN SPEED 4
10.0
0.1-100.0
PAN SPEED 5
20.0
0.1-100.0
PAN SPEED 6
30.0
0.1-100.0
PAN SPEED 7
40.0
0.1-100.0
Note: *IR models are limited to 40 deg/s on pan
Feature
Description
Default
Options
TILT SPEED 1
Correspondence between
joystick position and UPH
speed. Joystick positions
have been divided into 7
levels for both axis (pan &
tilt); each level corresponds
to a defined speed which can
be modified by the user.
1.0
0.1-40.0*
TILT SPEED 2
2.0
0.1-40.0
TILT SPEED 3
3.0
0.1-40.0
TILT SPEED 4
5.0
0.1-40.0
TILT SPEED 5
8.0
0.1-40.0
TILT SPEED 6
10.0
0.1-40.0
TILT SPEED 7
20.0
0.1-40.0
Note: *IR models are limited to 30 deg/s on tilt
LIMITS MENU
> 1 - ENABLE PAN LIM.
:
NO
2 - START PAN
: + 0.00
3 - END PAN
: + 0.00
4 - ENABLE TILT LIM.
:
NO
5 - START TILT
: + 0.00
6 - END TILT
: + 0.00
9 - RAMP TYPE
:
012
