16
en | Installing the Camera/Lens
High-speed Positioning System
F.01U.164.491 | 2.0 | 2010.03
Installation Manual
Bosch Security Systems, Inc.
4.
Reposition the camera/lens mounting tray sliding it forward so the lens is as close to the
front window as possible. Insert and tighten the four M4 x 10 screws and the four
washers (contained in the Cable and Screws accessory bag) as shown in
Figure 3.3
.
Figure 3.3
Attach Camera to Housing
5.
Locate the sealed plastic bag containing the desiccant bag.
6.
Place the desiccant bag inside the housing as shown in
Figure 3.4
, with the desiccant bag
secured into position by the metal fixing accessory and two fixing screws (supplied in the
Desiccant accessory bag).
Figure 3.4
Attach Desiccant Bag
7.
Remove the camera packaging material.
8.
Make sure the gasket is present and in good condition.
NOTICE!
A partially blocked view may result if the camera is not pushed up close to the front of the
housing.
Reference #
Description
1
Bracket
2
Desiccant Bag
