44
en | Configuring the System
High-speed Positioning System
F.01U.164.491 | 2.0 | 2010.03
Installation Manual
Bosch Security Systems, Inc.
The character being edited flashes and the joystick (up and down) can be used to change it.
After making the change, confirm and continue to edit the text, or else exit with the
Iris
button.
Table 8.4
Edit Text Menu
Offset Pan
By default, the offset pan is +0.00. The value can be changed to move the default pan position
of the unit to wherever is convenient. For example, if the installation requires that the NORTH
position should be at 0.00 ° (pan), then an offset pan can be entered to compensate for any
deviation from NORTH. After mounting, the NORTH position was found to be +41.37 ° (pan
position); therefore, the offset pan should be set to - 41.37 ° to make the pan +0.00 ° position
point to NORTH.
This has an effect on the Area Titles as defined in the
Area Position
menu. In the above
example, after the offset pan has been set to -41.37 °, the Area Text Menu “1 - Area” could be
changed to “1 - NORTH” to display NORTH on the screen at pan +0.00 ° position.
8.2.3
Display Parameters
The
Display Parameters
menu is used to enter the settings menus for the device movement
parameters.
EDIT TEXT MENU
v _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
> 1ABC 2DEF
3GHI
4JKL
5MNO 6PQR
7STU
8VWX
9YZ
0()x
+,-.
DISPLAY PARAMETERS
> 1 - OSD VIDEO ENABLING
: YES
2 - VIDEO CHARACTER TYPE
: 000
3 - HORIZONTAL DELTA
: 000
4 - VERTICAL DELTA
: 000
5 - ADDRSS NR.
YES
