Bosch rexroth MBT, Manual

Page: 330 / 422

8. Loosen and remove all mounting screws from the mounting ring ⑩ and
remove it.
10
⑩ Mounting ring
Fig. 12-9: Disassembling the mounting ring
9. Check the accuracy and stability of all mounted parts and mechanical
connections.
After proper mechanical assembly, continue with the other connections.
12.7 Mounting stators with cooling jacket and housing
12.7.1 General information
Depending on the intended use of the motor, certain stators can be ordered
which are already installed in a stator housing (type code option "H"). This
has the advantage that the supplied stator is ready to be mounted to the ma‐
chine.
For details about type, quality and position of the mounting holes, please re‐
fer to the relevant dimension sheet.
● In general, the stator housing has to be connected to the
machine via all of the mounting holes in the motor flange.
● All screwed connections are equipped with a liquid screw
lock. Refer to Chap.12.3 .
The following mounting instructions serve only for general orientation purpo‐
ses and use an example MST530 to describe a noncommittal, schematic
construction without considering the special structural features of the ma‐
chine.
The machine manufacturer has to consider the special character of his con‐
struction and has to prepare special mounting instructions. The machine
manufacturer's mounting instructions are the only binding guidelines.
318/409
Installation
MBT High Synchronous Torque Motors
Bosch Rexroth AG R911298798_Edition 08