Bosch rexroth MBT Manual Download Page 340

Page: 340 / 422

12.10 Coolant connection

Establish the connection of the coolant supply for the motor according to

chapter 8.5 "Motor cooling" on page 258

and the machine manufacturer's

connection diagrams.
Prior to machine commissioning, the whole cooling system must be subjected

to a leakage test and be ventilated. Also comply with the manufacturer's in‐

structions.

●

The supply lines are not allowed to exert any force on the

motor-sided screwed connections.

●

The connection diagrams of the product documentation

serve to create system circuit diagrams. The drive compo‐

nents have to be connected in the machine exclusively ac‐

cording to the machine manufacturer's system circuit dia‐

grams. This also applies to the incorporation of systems for

pressure reduction, flow and temperature monitoring.

●

Start-up of the coolant system is not a part of motor commis‐

sioning. Refer to the instructions of the manufacturers of the

machine and the cooling system.

12.11 Electrical connection

Connect the motor electrically according to the connection diagrams and the

instructions in

chapter 8 "Connection technique" on page 237

. Refer to the

references to supplementary documentation.

●

When using self-manufactured cables, ensure EMC-compli‐

ant design and installation.

●

Where applicable, ensure that connectors and lines are fas‐

tened for strain relief purposes.

●

The connection diagrams of the product documentation

serve to create system circuit diagrams. The drive compo‐

nents have to be connected in the machine exclusively ac‐

cording to the machine manufacturer's system circuit dia‐

grams.

12.12 Mounting examples

12.12.1 Basic information

The installation drawings are only examples for one installation option. It is

not possible to show all variants of installation in the different machines or ap‐

plications.

The binding installation drawings for a specific machine or appli‐

cation are made by the machine manufacturer himself.

Comply with the trademark rights of third parties during assembly

and use of single components delivered by Bosch Rexroth. For

any infringement of the right, the customer is liable for the accru‐

ing damage.

The order of the drawings for each frame size complies with the following

scheme:

328/409

Installation

MBT High Synchronous Torque Motors

Bosch Rexroth AG R911298798_Edition 08

Summary of Contents for rexroth MBT







































































































































































































































































































































































































































Search results

Summary of Contents for rexroth MBT

Reviews:

Related manuals for rexroth MBT

Brands by name

Popular brands

Bosch rexroth MBT, Manual

Search results

Summary of Contents for rexroth MBT

Reviews:

Related manuals for rexroth MBT

Brands by name

Popular brands