Bosch rexroth MBT Manual Download Page 338

Page: 338 / 422

①

Mount the first rotor (transfer "S" mark to machine)

②

Mount the second rotor (align "S" mark according to "S" posi‐

tion of first rotor)

③

Correct assembly = aligned pole rows of the magnets

Fig. 12-11:

Mounting the rotor with parallel motor arrangement

Parallel arrangement -stator as‐

sembly

During stator assembly, both stators have to be aligned in the axis construc‐

tion (as the two rotors), For stators with radial cable output that should be

used for parallel alignment, the cable output position is the mark for the align‐

ment (see

fig.12-12

and

fig.12-13

Parallel arrangement - power ca‐

ble connection (cable outlet in the

same direction)

If the stator is mounted with cable outlet in the same direction, the connection

wires of the stators must be applied according to the instructions in chapter

"Connection technology" or in

fig.12-12

326/409

Installation

MBT High Synchronous Torque Motors

Bosch Rexroth AG R911298798_Edition 08

Summary of Contents for rexroth MBT







































































































































































































































































































































































































































Search results

Summary of Contents for rexroth MBT

Reviews:

Related manuals for rexroth MBT

Brands by name

Popular brands

Bosch rexroth MBT, Manual

Search results

Summary of Contents for rexroth MBT

Reviews:

Related manuals for rexroth MBT

Brands by name

Popular brands