Bosch rexroth MBT, Manual

Page: 326 / 422

1
5
3
4
2
6
① Lifting gear
② Stator flange
③ Stator
④ Machine housing
⑤ Mounting screws for stator flange
⑥ Mounting screws for stator flange - machine housing
Fig. 12-3: Stator installation
3. Fasten the stator flange to the machine housing using the mounting
screws ⑥.
4. Fasten the rotor flange ⑦ with the mounting screws ⑨ to the rotor ⑩.
5. Fasten the motor bearing ⑧ to the rotor flange.
6. Secure the machine housing including the installed stator against lift-off
from the work table.
Strong magnetic forces may cause in‐
jury/damage!
WARNING
⇒ The permanent magnets at the rotor and the resulting magnetic forces
can cause the rotor to be abruptly pulled into the stator. Therefore, fas‐
ten the machine housing to the work table and only use lifting gear (e.g.
crane with hoisting chains) which avoids uncontrolled movements of the
rotor package while it is lowered into the stator.
7. Insert the rotor package centered (make forced guidance) into the stator
until it reaches its final position.
314/409
Installation
MBT High Synchronous Torque Motors
Bosch Rexroth AG R911298798_Edition 08