Bosch rexroth MBT, Manual

Page: 325 / 422

Rotor size MRT... F
axial
[N] F
radial
[N]
291
C
288
1320
D 1990
E 2650
360
B
370
1280
D 1910
E 3190
450
B
480
1,660
D 2480
E 4130
530
B
565
1940
C 2920
D 3890
E 4860
F 5830
G 9710
L 14560
P 6,800
R 8760
531
E
565
5200
L 15600
Tab. 12-1: Magnetic attractive forces during mounting
12.5 Mounting stators with cooling jacket, without mounting ring
The following figures show the general mounting sequence. Comply with the
machine manufacturer's special mounting instructions. All of the screwed
connections mentioned below have to be secured with liquid screwlock. Refer
to Chap.12.3 .
For details about existing threaded holes, tightening torques and screw-in
depths, please refer to the particular rotor or stator dimension sheet
Initial state: The stator and rotor lie on a clean and flat surface. All of the
steps described above have been complied with and have been executed.
Mount the motor according to the following schematic procedure:
1. Fasten the stator flange ② with the fastening screws ⑤ to the stator ③.
2. Center the stator with a suitable tool ① in the machine housing ④ and
bring it into its final position without jam.
MBT High Synchronous Torque Motors 313/409
Installation
R911298798_Edition 08 Bosch Rexroth AG