10/83 ctrlX
SAFETY
| Safety instructions
R911405651, Bosch Rexroth AG, DOK-XSAFE*-SAFEX-C.1XC-IT03-EN-P, Edition 03
2
Safety instructions
2.1
About this section
The product has been developed, tested and manufactured in accordance with generally
accepted rules of technology. Nevertheless, there is a risk of personal injury and property
damage if the safety instructions in this documentation and this section are not observed.
Read the documentation listed in Section 1.2 thoroughly and completely before working
with the product.
Store the documentation in such a way that it is accessible to all users at all times.
Always pass the product on to third parties together with the necessary documentation.
2.2
Intended use
The product is a programmable safety controller.
You may use the product as follows:
•
for provision safety shut-off systems and safety functions
•
as a safety component within the meaning of the Machinery Directive 2006/42/EC,
•
as an E/PE for risk reduction within the meaning of IEC 61508,
•
in safety circuits according to EN 60204-1 and EN 60204-32,
•
as an E/PE for functional safety within the meaning of 62061,
•
as SRP/CS (see abbr.) within the meaning of EN 13849,
•
as a device for the provision of safety functions according to EN 61800-5-2,
•
as a logic unit for signal conversion and processing in two-hand controls according to EN
574.
The device is a safety component according to Annex IV of the EU Directive 2006/42/EC
(Machinery Directive). It was developed, designed and manufactured in accordance with the
above-mentioned directive, as well as EU Directive 2014/30/EU (EMC Directive)
The product is intended for professional use only and not for private use.
Intended use also includes and requires fully reading and understanding this documentation
and, in particular, the 2 “Safety instructions section.
2.3
Improper use
Any use other than the use described in the Intended use section is considered improper
use and is therefore not permitted.
If unsuitable products are installed or used in safety-related applications, this could lead to
the occurrence of unintended operating conditions in the application, which could cause
personal injury and/or property damage. Therefore, only use products in safety-related
applications if such use is explicitly specified and permitted in the product documentation.
For example, in EX-protected areas or in safety-related parts of a controller (functional
safety).
Bosch Rexroth AG disclaims liability for damage caused by improper use. All risks
associated with improper use are borne solely by the user.
Summary of Contents for Rexroth ctrlX SAFETY SAFEX-C.12
Page 83: ......
