Bosch Rexroth ctrlX SAFETY SAFEX-C.12 Operating Instructions Manual Download Page 37

Page: 37 / 84

ctrlX SAFETY

| Maintenance

37/83

DOK-XSAFE*-SAFEX-C.1XC-IT03-EN-P, Edition 03, Bosch Rexroth AG

Maintenance

NOTE

Maintenance work in the device may only be performed by trained personnel!



To replace hardware and software components, please contact the Bosch Rexroth

Service department and only have this work carried out by trained personnel.

8.1

Regular maintenance activities

Include the following activities in your maintenance plan:

•

Check all plug and terminal connections of the components for correct seating and
damage at least once a year

•

Check the cables for breakage or pinching

•

Have damaged parts replaced immediately

•

Replacement of the device after a maximum service life of 20 years

Summary of Contents for Rexroth ctrlX SAFETY SAFEX-C.12





















































































Search results

Summary of Contents for Rexroth ctrlX SAFETY SAFEX-C.12

Reviews:

Related manuals for Rexroth ctrlX SAFETY SAFEX-C.12

Brands by name

Popular brands

Bosch Rexroth ctrlX SAFETY SAFEX-C.12, Operating Instructions Manual

Search results

Summary of Contents for Rexroth ctrlX SAFETY SAFEX-C.12

Reviews:

Related manuals for Rexroth ctrlX SAFETY SAFEX-C.12

Brands by name

Popular brands