ctrlX SAFETY
| Installation, removal, replacement and electrical installation
25/83
DOK-XSAFE*-SAFEX-C.1XC-IT03-EN-P, Edition 03, Bosch Rexroth AG
6.5
Electrical installation
WARNING
Danger to persons due to incorrect installation or incorrect electrical
installation!
Injury or death of persons, as well as damage to connected devices and machines:
Dangerous states of the system, which can result in personal injury, must be
prevented!
Protection in the event of direct and indirect contact must be ensured by
implementing the prescribed measures (connections with protective conductors,
insulation, etc.)!
6.5.1
External power supply
Use the power supply VAP01.1H-W23-024-010-NN from Bosch Rexroth,
material number R911171065, for logic supply. For more information about the external
power supply, including how to establish the overvoltage categories, please refer to the
documentation of the power supply.
DANGER
Danger to life due to high electrical voltage
The consequences can be death or serious bodily injury.
Only connect power supplies that generate the protective extra low voltage (24 V)
to mains voltages for which the power supplies are designed. Note the
overvoltage
categories (see the documentation of the power supply used)
Do not place the mains voltage on the protective extra low voltage.
Supply the device exclusively from voltage sources that have a protective extra-low
voltage (e.g. SELV or PELV according to EN 61131-2)
If a SELV voltage source is used, it can be converted to PELV due to the design of
the device and the connections (grounding!).
Summary of Contents for Rexroth ctrlX SAFETY SAFEX-C.12
Page 83: ......
