Bosch MFW3850B, Instruction Manual

Page: 16 / 166

16 Robert Bosch Hausgeräte GmbH

Place a bowl or plate under the outlet
opening.

Insert the mains plug.

Place the food to be processed in the
feed tube.

Insert pusher and hold in place.
Note:
Pusher can be inserted in one direction only.
Note position of the curve!

Switch appliance on with the On/Off
button.

Press food down using the pusher.
Do not exert too much pressure!
After using the appliance:

Switch appliance off with the On/Off
button.

Remove mains plug.

Pull out the pusher.

Remove the shredding attachment.
Holding down the release button, turn the
attachment to the right and remove.

Disassemble shredding attachment.

Clean all parts, see “Cleaning and
servicing”.
Cleaning and servicing
Warning!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Do not clean the aluminium parts (housing,
worm gear and threaded ring of the mincer
attachment) in the dishwasher. Harmless
discolouration may occur over time.
Cleaning the appliance

Pull out the mains plug.

Wipe the mincer clean with a damp cloth.
If required, use a little detergent.
Cleaning the attachments

Rinse housing, worm gear and threaded
ring of the mincer attachment by hand.

Dry metal parts straight away and apply
a little edible oil to protect them from rust.

Fig.

gives an overview of how to clean
the individual parts.
Troubleshooting
Fault
Appliance stops but does not switch off.
Cause
Appliance overloaded, e.g. mincer blocked.
Remedial action

Switch appliance off and wait until it
comes to a standstill.

Press reverse button to remove the
blockage.

Wait until the drive comes to a standstill.

Switch on appliance again.
Fault
Appliance switches off during use.
Cause
Appliance overloaded. Overload protection
feature has been activated.
Remedial action

Switch off the appliance.

Remove mains plug.

Leave the appliance to cool down for
approx. 60 minutes.

Lift appliance and press the thermal
circuit breaker on the underside of the
appliance (Fig.

, 14).

Insert the mains plug.

Switch on appliance again.
en
Important information
The appliance requires no maintenance.
Thorough cleaning protects the appliance
from damage and keeps it functional.
Electric shock risk
Never immerse the base unit in liquids and
do not clean in the dishwasher.
Before cleaning the appliance, pull out the
mains plug!
Important information
If the fault cannot be eliminated, please
contact customer service.
MFW4-6.book Seite 16 Dienstag, 12. August 2014 9:45 09
16
en