Bosch MFW3850B, Instruction Manual

Page: 13 / 166

Robert Bosch Hausgeräte GmbH 13
5 Pusher
6 Lid for pusher
7 Release button
8 Handle
9 Storage compartment with insert
10 Cover for storage compartment
11 Indicator light
12 Reverse button
13 On/Off button
14 Thermal circuit breaker
15 Cord store
Mincer attachment
16 Casing
17 Worm gear with driver
18 Blade
19 Perforated disc
a) coarse, hole diameter 8 mm
b) fine, hole diameter 3 mm *
c) fine, hole diameter 3.8 mm *
d) medium, hole diameter 4.8 mm *
20 Threaded ring
Sausage filler attachment
21 Nozzle
22 Bearing ring
Kebbe attachment
23 Shaper
24 Conical ring
Fruit press attachment *
25 Casing
26 Worm gear
27 Filter insert,
a) fine
b) coarse
28 Filter holder
29 Outlet funnel
30 Threaded ring
31 Pulp nozzle
Shredding attachment *
32 Casing
33 Pusher
34 Interchangeable insert
a) Slicing attachment
b) Shredding insert – coarse
c) Shredding insert – fine
d Grating insert
* for some models
Predetermined breaking point
To prevent serious damage to your appliance
if the mincer is overloaded, the driver has
a notch (predetermined breaking point).
If an overload occurs, the driver breaks
instead. However, the driver can easily
be replaced.
Otherwise spare parts with a predetermined
breaking point are not a component of our
warranty obligations. Such spare parts can
be purchased from customer service
(order no. 753348).
Operation

Before operating the appliance and
accessories for the first time, clean
thoroughly; see “Cleaning and servicing”.
Fig.


Stow perforated discs in the storage
compartment.

Stow individual parts of the sausage filler
attachment and kebbe attachment in the
pusher and close the pusher with the lid.
Assembling the mincer attachment
Fig.


Take perforated disc with required hole
diameter out of the storage compartment.

Insert worm gear into the housing.

Put blade on the worm gear.
Blades must face the perforated disc.

Put perforated disc with the required hole
diameter on the worm gear. Recess on
the perforated disc must be situated on
the lug in the housing.

Screw on threaded ring clockwise.
Do not tighten the threaded ring too tight.

Disassembly is in reverse order.
Use for:
– processing raw or cooked meat, bacon,
poultry and fish.
– Do not process bones!
– Process steak tartare through the mincer
twice.
en
Risk of injury!
Do not insert mains plug until all
preparations for working with the
appliance are complete.
MFW4-6.book Seite 13 Dienstag, 12. August 2014 9:45 09
13
en