Bosch MFW3850B, Instruction Manual

Page: 14 / 166

14 Robert Bosch Hausgeräte GmbH
Assembling sausage filler attachment
Note:
The parts of the mincer attachment (without
perforated disc and blade) are used.
Fig.


Take nozzle (A) and bearing ring (D) out
of the pusher.

Insert worm gear into the housing.

Insert nozzle into the threaded ring.

Put bearing ring on the worm gear and
hold in place. Recess on the bearing ring
must be situated on the lug in the housing.

Screw on threaded ring with nozzle
clockwise. Do not tighten the threaded
ring too tight.

Disassembly is in reverse order.
Use for:
Filling artificial and natural casings with
sausage meat.
Assembling kebbe attachment
Note:
The parts of the mincer attachment (without
perforated disc and blade) are used.
Fig. 

Take shaper (B) and conical ring (C) out
of the pusher.

Insert worm gear into the housing.

Insert shaper into threaded ring.

Put conical ring on the worm gear and
hold in place. Recess on the conical ring
must be situated on the lug in the housing.

Screw on threaded ring with shaper
clockwise. Do not tighten the threaded
ring too tight.

Disassembly is in reverse order.
Use for:
Shaping dough tubes.
Operating the appliance
Fig.


Stand the mincer on a clean, level work
surface.

Take power cord out of the cable storage
and pull out to the required length.

Put the completely assembled mincer
attachment, inclined slightly to the right,
on the drive.

Turn mincer attachment upwards until it
engages.

Tighten threaded ring on the mincer
attachment.

Attach filling tray.

Insert pusher into filling opening.

Place a bowl or plate under the outlet
opening.

Insert the mains plug.

Switch appliance on with the On/Off
button.

Place the food to be processed in the
filling tray.

Only use the pusher when adding more
ingredients.
Application instructions:
If the food to be chopped up jams in the worm
gear: Use reverse button to remove the
blockage.
1. Switch appliance off with the On/Off
button.
2. Wait until the drive comes to a standstill.
3. Briefly press reverse button.
4. Wait until the drive comes to a standstill.
5. Switch appliance on with the On/Off
button.
After using the appliance:

Switch appliance off with the On/Off
button.

Remove mains plug.

Pull out the pusher.

Remove filling tray.

Remove the mincer attachment.
Holding down the release button, turn the
attachment to the right and remove.

Disassemble mincer attachment.

Clean all parts, see “Cleaning and
servicing”.
en
Risk of injury
Before fitting/removing attachment, wait
until the drive has come to a standstill and
pull out the mains plug.
Do not reach into the feed tube. Always
use the stuffer to push food down the hole.
MFW4-6.book Seite 14 Dienstag, 12. August 2014 9:45 09
14
en