LTC 8850 |
Instruction Manual
|
VCR Server
EN
| 67
Bosch Security Systems | 02 April 2004
4.4.6.2 Timer Tab
Figure 108 Timer Tab
The
Timer
tab provides the following functionality:
•
Up to seven programs can be programmed.
•
Up to two programs can be scheduled on each day
of the week.
When typing start times and stop times include a
P
for
PM or
A
for AM.
An asterisk in the
Prog1
or
Prog2
column indicates no
program scheduled.
4.4.6.3 Alarm Tab
Figure 109 Alarm Tab
The
Alarm
tab is used to set up or view the settings of
the VCR’s alarm functions.
Alarm Duration –
Length of time the VCR stays in
alarm recording mode. It can be set from five seconds
to three minutes or to Manual. When it is
Manual,
the
VCR stays in alarm recording mode until an alarm
input is no longer being received.
Alarm Recording Speed
– Tape speed when VCR is
in alarm recording mode.
Alarm Ready
– Whether or not VCR will enter alarm
recording mode when the VCR receives an alarm
input.
Alarm Out
– When set to Pulse, approximately
12 volt pulses will be applied to the VCR external
connection after alarm recording ends. When set to
Duration, no voltage is applied when alarm recording
ends.
Tape Recycle
– What the VCR does when the tape
reaches the end during recording.
During Rewind, Stop if Alarm is selected:
•
If no alarm has been received during the
recorded period, the VCR automatically
rewinds to the beginning of the tape and
continues recording.
•
If an alarm has been received during the
recording period, the VCR automatically
rewinds to the beginning of the tape and then
enters the STOP mode.
During
Rewind, Stop
is selected:
•
When the tape reaches the end during
recording, the VCR automatically rewinds to
the beginning of the tape and enters the
STOP mode.
During
Rewind, Re-Record
is selected:
•
When the tape reaches the end during
recording, the VCR automatically rewinds to
the beginning of the tape and continues
recording.
4.4.6.4 Display Tab
Figure 110 Display Tab
