Bosch LTC 8850 Series Instruction Manual Download Page 35 | Manualshive

Page: 35 / 72

background image

EN

| 35

Bosch Security Systems | 02 April 2004

LTC 8850 |

Instruction Manual

|

Allegiant Server

Bay Number

In the Camera Table, the Bay field for a trunk or
remote camera indicates the address number of the
Satellite bay. The maximum bay number is as follows:

Monitor Number

The monitor number field is used to designate which
Satellite logical monitor is connected to the trunk line.

Controllable

Displays a double ended arrow symbol on the overlay
of the monitor screen. This checkbox would normally
be set by an installer to indicate that the camera is
controllable.

3.2.6.2 Monitor Table

This tab controls the overlay on the monitor screens.

Figure 70 Monitor Configuration Table

Icon

This column is not shown when the Allegiant server
runs in the stand-alone mode. When the Allegiant
Server is accessed within the GUI, this column
provides a description of the icon representing this
device in the map. Right-clicking in this column will
bring up the icon customization dialog and will allow
the user to jump to its location in the map. This cell is
blank for devices that do not have icons in the map.

Monitor Number

This field is only available in LTC 8900 systems. It is
used to change the number that is used to call up or
display a particular monitor. The number in this field
is known as a logical monitor number.

Duplicate monitor numbers are not allowed. If you
attempt to redundantly assign a monitor number to a
second output, you will be warned that the number is
already in use and given the option to abort the
assignment or continue. If you choose to continue, the
monitor number will be redesignated and the monitor
originally assigned to that number will become
unconfigured.

When this field is visible (in a LTC 8900 document)
and the user deletes a row in the monitor table, the
monitor becomes unconfigured and the row becomes
blank. The software performs less processing for
unconfigured monitors which may result in

improved

performance

.

To unconfigure a monitor, click the left mouse button
in the Output column of the desired row, then press
the

delete

key.

Monitor Title

The monitor title is a 12 character field that describes
the monitor.

X-Coordinate/Y-Coordinate

These coordinates serve to position the text overlay on
the monitor. The ranges and default values will vary
based on model type.

Brightness

This option controls the brightness of the text overlay.
The range is from brightest to darkest. The default
value is brightest.

Monitor Display

The monitor display can show the title, status, time,
and date. Selections in the monitor display column
control whether or not these items are displayed.

Status Display

The top line of the overlay display can either display
system status information for that monitor or the
monitor title. Selection is made using the status display
content field.

System

Model

LTC

8100

LTC

8200

LTC

8300

LTC

8500

LTC

8600

LTC

8800

LTC

8900

Max Bay

Number

256

256

256

64

256

256

256

«
...
33
34
35
36
37
...
»

Summary of Contents for LTC 8850 Series









































































Reviews:

No comments

Related manuals for LTC 8850 Series

Brand: Cambridge SoundWorks Pages: 20

Brand: Danfoss Pages: 28

BEA LZR-WIDESCAN

Brand: Halma Pages: 20

Brand: Jäger Direkt Pages: 5

Brand: K-array Pages: 20

Brand: NA-DE Pages: 2

Brand: NA-DE Pages: 5

Brand: NA-DE Pages: 5

Brand: NA-DE Pages: 2

Brand: Paradox Pages: 2

Brand: Paradox Pages: 2

Digiplex EVO DGP2-640

Brand: Paradox Pages: 24

Brand: Samsung Wisenet Pages: 16

Brand: BST Pro Pages: 9

Brand: Vivotek Pages: 2

Brand: Interlogix Pages: 6

Brand: Lorex Pages: 2

Brand: Aiwa Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands